PLA plus1

PLA Silky Rainbow filament 3D printer Filament

PLA Silky Rainbow filament 3D printer Filament


Description: Torwell Silk rainbow filament is PLA based filament with silky, gleaming apperance. Green – red – yellow – purple – pink – blue as the main color and the color changes 18-20 meters. Easy print, Less Warping, No heated bed required and Enviroment friendly. 

  • Color: Rianbow
  • Size: 1.75mm/2.85mm/3.0mm
  • Net Weight: 1kg/spool
  • Specification

    Product Parameters

    Recommend Print Setting

    Product Tags


    • Beautiful, shiny surface finish.
    • Glossy surface and silk-like smooth texture.
    • 100% bio-degradable and FDA food safety approved.
    • Low material shrinkage rate, uniform diameter.
    • Neatly wrapped, dissolve well, feed uniformly and constantly without clogging the nozzle or extruder. 

    Product Features

    Brand Torwell
    Material polymer composites Pearlescent PLA (NatureWorks 4032D)
    Diameter 1.75mm/2.85mm/3.0mm
    Net weight 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool
    Gross weight 1.2Kg/spool
    Tolerance ± 0.03mm
    Length 1.75mm(1kg) = 325m
    Storage Environment Dry and ventilated
    Drying Setting 55˚C for 6h
    Support materials Apply with Torwell HIPS, Torwell PVA
    Certification Approval CE, MSDS, Reach, FDA, TUV and SGS
    Compatible with Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker and any other FDM 3D printers
    Package 1kg/spool; 8spools/ctn or 10spools/ctnsealed plastic bag with desiccants

    Model Show

    Print show

    Factory Facility


    Printing Tips

    ASV A

    1). Be sure to fix the filament end after each time use, such as insert the free end of the filament into the hole to avoid the filament being tangled for next time use.

    2). In order to extend the life of your filament, please store it in a dry, sealed bag or box

  • Previous:
  • Next:

  • Density 1.21 g/cm3
    Melt Flow Index(g/10min) 4.7(190℃/2.16kg)
    Heat Distortion Temp 52℃, 0.45MPa
    Tensile Strength 72 MPa
    Elongation at Break 14.5%
    Flexural Strength 65 MPa
    Flexural Modulus  1520 MPa
    IZOD Impact Strength 5.8kJ/㎡
    Durability 4/10
    Printability 9/10
    Extruder Temperature(℃)           190 – 230℃Recommended 215℃
    Bed temperature(℃)  45 – 65°C
    Nozzle Size ≥0.4mm
    Fan Speed  On 100%
    Printing Speed 40 – 100mm/s
    Heated Bed Optional
    Recommended Build Surfaces Glass with glue, Masking paper, Blue Tape, BuilTak, PEI
    Write your message here and send it to us